The Difference Between Latex Gloves, Pvc Gloves And Nitrile Gloves

Shijiazhuang Mining Area Fengwang Machinery Co., Ltd., established in 1999, specializes in the research, development, design and manufacture of disposable gloves production lines. Our products are spread all over the country and exported to Korea, Vietnam, Iran, Malaysia, etc. Moreover, we are also one of the most professional exporters of latex gloves production line in China. As our products are of good quality and excellent price, they have won praise from people inside and outside the industry. disposable gloves production lines manufacturer now share with you:

Latex Gloves Production Line

There is no absolute difference between gloves. People can choose the gloves that suit them according to their needs.

Latex gloves are also called rubber gloves. Latex is a natural material and is derived from rubber tree sap. Natural latex is a biosynthetic product. Due to the differences in tree species, geology, climate, and other related conditions, its composition and structure often vary greatly.

The material of Ding Qing gloves can be degraded, it is not allergic to wear, pigments can be added, and the color is brighter. His disadvantages are poor elasticity and the price is higher than latex gloves; PVC gloves are made of polyvinyl chloride; PVC gloves have the advantage of low price You can add pigments to create bright colors. The disadvantage is that it contains a high plasticizer, which is an internationally recognized public enemy of health. It is volatile to heat and volatile, and it is non-degradable. So, the advantages of latex gloves are Degradation and elasticity are also better, but long-term wearing of latex gloves in some people can cause skin allergies.

What about their antistatic properties? ESD refers to the anti-static performance of products. Generally speaking, nitrile rubber products have anti-static properties, while PVC and latex do not have anti-static properties, so they are not suitable for ESD areas.

In fact, the antistatic properties of nitrile gloves and nitrile gloves also depend on the formula made by the glue. The ESD performance of the products made by the glue of different manufacturers is different. It has little relationship with the glove manufacturer, even the same glue. There are also differences in the performance of the products, so nitrile gloves and nitrile gloves can be used as general antistatic gloves, but the performance is lower than professional antistatic gloves.

Attention when wearing Ding Qing gloves:

1. Do not bring rings or other jewelry on your hand;

2. Fingernails should be trimmed regularly, not too long, so as not to damage the fingertips of the gloves;

3. Prevent puncture by sharp objects, such as needles, toothpicks, etc .;

4. Take off gloves to slowly pull down from the wrist, not pull from your finger;

5. Pay attention to the size when choosing, if it is too small, it will cause smooth blood flow, if too large, it will easily fall off;

6. Periodic inspection is required, if it is found damaged, it can not be used again.

Precautions for using PVC gloves

1. Disposable PVC gloves do not have high temperature resistance and insulation properties. Do not use it in high-temperature work places, and never use it as insulating gloves.

2.If the disposable PVC gloves are cut, it will affect the protection effect.

3. Disposable PVC gloves should be kept dry and ventilated during storage to prevent moisture and mold.

4. When using disposable PVC gloves. Do not touch corrosive substances.

Note for latex gloves:

1. Avoid contact with chemicals such as acids, bases, and organic solvents.

2. When handling infectious substances, powder-free and low-protein latex gloves should be selected. Powder-free and low-protein latex gloves can reduce the risk of allergies. However, the so-called hypoallergenic latex gloves cannot reduce the risk of latex allergies, and can only reduce the allergic reactions caused by chemical additives in latex gloves.

3. Resolutely implement the code of practice to reduce the chance of latex harm. Such as:

1) Do not use oily hand cream or lotion when wearing latex gloves, as they will cause deterioration or damage of latex gloves.

2) After taking off or removing the latex gloves, wash your hands with a mild soap and dry your hands completely.

3) Disposable latex gloves should not be re-used (because the gloves may have lost their ability to defend against harmful substances).

Why do military and police wear tactical gloves?

When the police face criminals, the danger they face is more than just knives and guns. Even if it is a body search, the suspect may have a skin disease, an infectious disease, a pocket with a blade, a needle for drug use, etc. In the arrest, he faces a greater risk of cuts, and the risk of cross blood with the criminal.

So how to avoid these injuries? It's simple. Wear gloves. At this time we need to use gloves to protect ourselves.

It is a very mature experience among European and American police officers. In many videos, we can see European and American police officers wearing gloves before arresting and searching. An old Hong Kong policeman has also talked with the author in detail about the experience of using gloves in missions.

There are several types of gloves to choose from for different tasks and facing risks.

1. Labor protection gloves

Represented by super technicians, it is used in various industries to protect users' hands. It is used to operate weapons or equipment, and to protect hands from bumps and pinches during climbing. It can also provide sufficient friction for weapon equipment operations, but it does not have the functions of cut resistance, puncture prevention, and blood blocking.

2. Stab-proof cut-resistant gloves

Super technicians, PPSS, tortoise shell and other brands all have such products, which can prevent general cuts and stab wounds during capture, but generally have poor anti-cutting interlayers, which has poor sensitivity, such as thick interlayers like PPSS, Will affect weapon operation.

3. Rubber gloves

The most common is medical rubber gloves produced by latex gloves production line, which have sufficient sensitivity during body searches to avoid direct contact with each other's skin and direct contact with blood. There is a needle in the other's pocket when searching, and the blade can also avoid direct skin damage. And it is light and does not take up volume. It is recommended that every policeman on the street guard one in a medical bag or sundries bag. The disadvantage is that it is uncomfortable to wear for a long time, and the strength is not easy to break. Although the body search can avoid direct contact with the blade needle, it still does not have the function of puncture and cut prevention.

3M rubber gloves are recommended here, of course, not 3M gloves for dishwashing in the supermarket, but 3M nitrile gloves. Good fit, no problem for body search, and thicker than medical latex gloves. It can also provide sufficient protection when operating weapons and equipment. What's more interesting is that this glove has very high friction. When grabbing the other arm, don't try to escape.

Latex Gloves Production Line

If you don't need 360-degree full protection and need better comfort, then this kind of gloves is also good. The palms and fingers are soaked with nitrile, which can also avoid contact with skin and blood. The friction is also good. The back is made of fabric, which is more breathable and comfortable.

From the above recommendations, we do not recommend any tall tactical gloves. Most tactical gloves are either aimed at shooting needs, improving fit, protecting both hands when shooting, or used for general operations, and protecting both hands when climbing, and cannot meet the needs of police in various complex and diverse tasks. Therefore, it is recommended that every comrade of the police must bring gloves when they are on duty, and bring a pair of gloves with different needs.

Malaysian latex glove prices expected to rise by more than 10% next year

According to foreign media news, the Malaysian Rubber Glove Manufacturers Association (MARGMA) pointed out that the rubber glove manufacturing industry will continue to grow in 2020. It is estimated that based on 2019 export revenue of 18.2 billion ringgits (about 30.7 billion yuan), Amounted to RM20.68 billion (about 34.9 billion yuan).

MARGMA Chairman Liu Zhaofu pointed out that this is driven by increasing global demand, and Asia and Africa will become the next largest growth region of the rubber gloves industry. "The global demand for rubber gloves this year is estimated to reach 300 billion pieces and is expected to grow by 12% annually."Liu Zhaofu said that Malaysia is the world's largest producer and major exporter, accounting for 63% of global supply, about 188 billion. According to statistics, from January to August this year, the total export value of Malaysian rubber gloves reached RM11.3 billion, a decrease of 2.4% over the same period last year.

"However, with climate change and the end of the holiday season, market demand has begun to pick up since September. This is mainly due to the relationship between low global demand-side inventory clearance and inventory replenishment at the end of the year. It is expected that export volume will be from November to December More. Therefore, total export revenue in 2019 is expected to increase by 2.6% from RM17.74 billion in 2018 to RM18.2 billion. "

Latex Gloves Production Line

Looking forward to 2020, he believes that the price of rubber gloves will increase by 10% to 15% in 2020 due to the increase in natural gas and water prices and higher minimum wages, and these will be passed on to international consumers.

Liu Zhaofu also said that Malaysia is no longer the largest exporter of rubber gloves, and its biggest competitor is Thailand. However, Malaysia has sound infrastructure, skilled technology, and a good government operating environment, and is not afraid of competing with Thailand.

He disclosed that many large manufacturers have realized automated production, they use latex gloves production line, but not all procedures can be automated, and still rely on human resources. Manufacturers with high productivity are expected to achieve the production efficiency of 1.5 million rubber gloves for 1.5 workers next year.

Latex gloves production process

There are several types of gloves. The most common is latex gloves, whose basic raw material is natural latex. Others are made from synthetics, such as polyvinyl chloride gloves, which are suitable for people who are allergic to latex. Nitrile gloves equipment suppliers will take an example of latex gloves today and see how it works.

The first is to pour the pigment into the latex and stir, but if you are making that kind of milky gloves, you don't need to add additional pigments.

After mixing well, if you reach into the latex liquid at this time, you can put on a glove for yourself in a few seconds. It's just that it's still fragile, and it just falls off when you tear it off.

On the other side, a large number of hand molds are always ready. Hand molds are usually made of ceramic or aluminum.

In order to thoroughly wash off the latex residue from the previous batch of gloves, the ceramic hand molds must be sent for cleaning first, and then washed with soap and water.

Rinse again with bleach.

Also use this wheel-type cleaning tool to clean the finger seams, because once there is residue, the new gloves made are easy to have holes.

After washing, hand molds need to drip clean water and let them dry thoroughly.

Next, the hand molds need to be coated with a chemical film first. This is because latex liquid cannot directly adhere to ceramic hand molds. Applying a chemical film can help latex adhere.

After soaking in the chemical liquid, the hand mold will really start to "wear gloves". They are hung in rows and immersed in latex liquid while moving on the assembly latex gloves production line.

Different factories have different processing methods. Some projects choose not to move the latex liquid by hand. Rows of hand molds are suspended statically. The container filled with latex liquid is moved up. A gel-like film is formed after it comes out.

At this time, the gel-like film has not been shaped. Take off your gloves and try to tear it off.

So the next step is drying and setting. Professionally speaking, this step is called vulcanization. Some assembly lines are collectively left to dry, and they need to be flipped during the process to bake them collectively.

Some choose to hang in rows and spin to dry. After drying, the latex gloves are basically formed. The next thing to consider is how to remove it from the prosthetic hand. The first step in removing is to press the edge.

Latex Gloves Production Line

They need a whole row of round tools to roll out the corners on the arm. With this corner, the gloves can be easily removed from the artificial hand.

Finally, it's time to take off the gloves. You can choose to remove the gloves manually or operate the machine. Generally, gloves made of synthetic materials need to be manually removed. Such gloves are more sticky and difficult to remove than gloves made of natural latex, so it requires manual labor.

There are also some assembly line operations that are relatively rough, and gloves made of natural latex can be automatically removed by a latex gloves making machine, and it is done by directly rushing down with air pressure.

The manufactured gloves also need to be tested before leaving the factory. First, pull on a stick and inflate the glove to check for holes. At the same time, factories generally take samples for testing, and some samples of the same batch will be sent to another workshop for watering inspection to ensure the quality of the products. The staff wore gloves and carefully held up the freshly prepared gloves. Other factories choose to have workers try them on individually.

After testing, you can pack and leave the factory.

Why You Should Choose Our Products?

Our company is a professional latex glove equipment supplier. The latex gloves production line is our hot sale product. Because our products are of good quality and excellent price, they have won unanimous praise from people inside and outside the industry.

Our company's latex glove production equipment adopts continuous production mode and direct immersion mode, with uniform film formation and bright color. Various models and specifications can be produced online at the same time. The production line has a length of 60 meters, 80 meters and 100 meters. It has high degree of automation, large output, can be configured for automatic demoulding, and can also be designed and installed according to the customer's production site. It refers to the machinery and equipment that uses natural liquid latex as raw material to produce latex gloves. Generally, it is processed through a series of processes such as hand mold dipping tank, drying, vulcanization and cooling. Latex gloves are divided into five types: smooth latex gloves, pockmarked latex gloves, striped latex gloves, transparent latex gloves and powder-free latex gloves. Latex gloves are divided into disposable latex gloves, household latex gloves, industrial latex gloves, medical latex gloves and other categories according to their uses. The latex glove production equipment mainly consists of four parts: batching equipment, including a stirrer, a filter barrel, a vacuum defoaming machine and a glue solution delivery pump; Immersion equipment comprises a frame, a conveying chain, an immersion tank, a recovery tank machine and a dripping tank; Plasticizing furnace; Cooling, lip rolling, powder spreading, demoulding and powder removing equipment comprises a cooling group, a lip rolling group, a powder spreading group, a powder removing module group and a powder removing group.  

Latex gloves production line the rubber is first sliced by a rubber mixing machine and then sent to a sol tank to mix the sol with gasoline. After emulsification and modulation, the sol is pumped to a latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower, and is heated and distilled by steam. Light component gasoline is heated to form a gas phase, and the gasoline gas is mixed and cooled by cold water in an oil-gas cooler. The oil-water mixture goes to the oil-water separator, and the oil and water are separated. The upper gasoline is recovered, the lower water is pumped to the cooling tower for cooling, and the gas gasoline in the distillation tower is cooled after cooling. The emulsion in the distillation tower kettle is sent to an emulsion stirring cylinder according to its own pressure to be stirred and mixed, and then separated from the glove raw material emulsion by a centrifuge, and then mixed and filtered for later use. The glove model is first cleaned by acid and alkali and water, and the cleaned model is immersed in hot water to be heated, and then dipped in coagulant and dried to stop dipping. After gum dipping, the mixture is sent to an oven for preliminary drying, fiber inner sleeve is added, hot water is flushed, and then the mixture is sent to the oven for vulcanization, drying and molding. After demoulding, latex gloves are inflated for inspection, shaped at low temperature, dull at medium temperature, washed with water, dehydrated, dried and then packaged and sent to waste warehouse.

Latex Gloves And Latex Gloves Equipment

Hello, my dear friends! Shall i can introduce something about the latex gloves for you ? If yes, now i will begin. Latex gloves equipment is our company's main product. But also we are one of the most professional latex gloves production line exporter in our country. Because our products are of good quality and excellent price, they have won unanimous praise from people inside and outside the industry.

When we make the latex gloves, we will use the equipment. The production line of latex glove manufacturing machine is a special latex glove equipment for producing rubber gloves. It is equipped with automatic ejection device (mechanical type), with high efficiency, high output and low labor cost, and is favored by the industry. In order to reduce the trouble of installation abroad and improve the convenience of maintenance and migration, our company has specially designed a detachable structure to improve the best utilization rate of equipment. The rubber will be sliced in a mixer and then sent to a melting tank to be mixed with gasoline. After emulsification and preparation, the sol has been sent to the emulsion storage tank. Rubber melted into gasoline will be sent to the top of the distillation column. Gasoline has been separated by heating. The emulsion remaining in the reaction tank will be sent to the mixing tank by its own pressure, and the emulsion will be separated from the centrifuge. After adding color and filter, latex can be used. The glove model will first be washed with acid and water. Immerse the model in hot water for cleaning. After that, clean molds need to be immersed in coagulant.  The impregnation steps are as follows: the fibers are preliminarily dried by an oven, added into the fiber inner sleeve, sent into a hot oven for curing, and dried and molded. After stripping, the gloves will be inflated for inspection, set at low temperature, set at medium temperature, washed with water, dehydrated, dried, packaged and then sent to the finished product warehouse.

Latex gloves is a kind of gloves, which are different from general gloves. Through emulsion processing, it can be used in household, industrial, medical, beauty and other industries. Latex gloves are essential hand protection equipment. Latex gloves are made of natural latex and other excellent additives after special surface treatment, which can be worn comfortably. For industry, agricultural production, medical treatment or daily life, it has a wide range of applications. Latex gloves include smooth latex gloves, concave latex gloves, transparent latex gloves, striped latex gloves and powder-free latex gloves. Latex gloves are divided into several types according to their uses: disposable latex gloves, household gloves, industrial latex gloves, medical latex gloves, etc. Length: 575px, 750px(9 inches, 12 inches); 0.08 mm -0. 09mm thick; Color: beige/light yellow; Main ingredients: natural latex; Import and export commodity code is 4015; Packing: 100pcs/bag (vacuum packing); Specifications: XS, s, m, l, XL; 100% natural latex gloves have high dexterity, so they are very comfortable to wear with high strength. The pinhole rate is low, so it has excellent closing protection characteristics. It is widely used in electronics, food, medicine, optoelectronics and other related industries. The pinhole rate is low, so it has excellent closing protection characteristics. It is widely used in electronics, food, medicine, optoelectronics and other related industries. The pinhole rate is low, so it has excellent closing protection characteristics. It is widely used in electronics, food, medicine, optoelectronics and other related industries.

Latex glove equipment and production line

Latex gloves are one kind of gloves, which are different from the general gloves and are made of latex. It can be used as household, industrial, medical, beauty and other industries, and it is a necessary hand protective equipment. Latex gloves equipment, which is made of natural latex and other fine additives, are widely used in industrial and agricultural production, medical treatment and daily life.

Process description.

The rubber is first sliced by the rubber mixer and then sent to the sol cylinder to mix the sol with gasoline. After emulsification and modulation, the sol is pumped to the emulsion intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower, heated and distilled by steam, and the light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-gas cooler. The oil-water mixture goes to the oil-water separator and the oil-water is stratified. The upper gasoline is recovered, the lower water is pumped to the cooling tower for cooling, and the gas gasoline of the distillation tower is cooled after cooling; the emulsion of the distillation tower kettle is sent to the emulsion mixing tank according to its pressure for mixing and mixing, and then to the centrifuge to separate the glove raw latex, and then to be used after color mixing and filtering.

The glove model is first cleaned by acid and alkali and then washed by water. The cleaned model is first immersed in hot water and heated until it is immersed in coagulant and dried for dipping. After dipping, it is sent to the oven for preliminary drying, fiber inner sleeve, hot water flushing, and then sent to the oven for curing, drying and forming. After demoulding, the gloves shall be inflated for inspection, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried before being packaged and sent to the finished product warehouse.

The invention relates to the field of medical devices, in particular to a glove mold cleaning device in a medical glove processing device.

The usage of medical gloves Gloves equipment is as follows:

Fill the mould washing tank with the required pH value liquid, turn on the ultrasonic generator, which will send out the high frequency vibration signal, and convert it into mechanical vibration through the ultrasonic transducer in the ultrasonic vibration plate 3;

The glove mould is hung and fixed in the mould conveyor belt 1 above the mould washing groove, and is transported along the conveyor belt 1 at a set speed;

When the first glove mold slides to the inlet of the washing groove, the position sensor 5 on the groove wall at the inlet transmits the induction signal to the controller, which controls the motor operation. The brush connected with the motor moves upward along the chute and stops at the upper end of the chute. When the glove mold on the conveyor belt 1 passes through the brush area, the brush fully contacts the glove mold and brushes off the glove mold angle. Dirt stuck in the falling;

When the position sensor 5 senses the last glove mould passing by, it will send the induction signal to the controller. The controller will set a period, so that the glove mould can be cleaned in the mould washing tank, and then send the control command to the first solenoid valve 9, so that the spray head 6 will spray water to wash the brush 7. After washing, the controller will control the motor to run in reverse, and the brush connected with the motor will move along the chute. Move down until the lower end of the sliding groove, and immerse the brush head into the liquid in the mold groove to clean the dirt stuck on the brush;

When the glove mould cleaning is finished and leaves the mould washing tank, the pH sensor 4 will send the monitoring signal to the controller. After the controller judges and processes, it will send the control command, open the first solenoid valve 8, and the liquid in the container containing the acid-base liquid connected with the acid-base liquid inlet flows into the mould washing tank through the acid-base liquid inlet, adjust the pH value, make it return to the set value, and complete a round of cleaning.

The mold on the glove mold conveyor belt 1 slides in batches during operation.

The beneficial effect of the invention is that the brush and the ultrasonic wave are applied to the pickling tank or the alkali washing tank of the ultrasonic cleaning tank at the same time, so that the cleaning effect is better, and the cleaning efficiency is greatly improved, and the cleaning of the hand mold is an important link, the cleaning effect and efficiency are improved, that is, the pollution in the following links is reduced.