What are the differences between nitrile gloves and latex gloves?

What are the differences between nitrile gloves and latex gloves? What are the advantages and disadvantages? Following the Nitrile Gloves equipment Supplier would like to share with us.

Nitrile gloves and latex gloves are widely used in electronic processing, mechanical processing, food processing and other industries. Because they are disposable gloves, many people do not know how to buy gloves. Here are the differences between these two gloves

Advantages and disadvantages of nitrile gloves and latex gloves

NBR is a synthetic rubber consisting mainly of acrylonitrile and butadiene

Advantages: non-allergic, biodegradable, can be added to paint, more bright color

Disadvantages: poor elasticity, the price is higher than latex products, which supplied by Latex Gloves Making Machine Exporter, dingqing material resistant to chemical and acid and alkali effect than latex is much better, so expensive.

Latex glove material: natural latex (NR) 

Nitrile Gloves Production Line

Advantages: elastic and degradable

Disadvantages: allergic reactions in some populations

Latex gloves: compared with nitrile gloves, the toughness and abrasion resistance are slightly inferior, but the elasticity is better. Compared with nitrile gloves, the abrasion resistance, acid and alkali resistance and grease resistance are slightly worse, and the acid and alkali resistance are slightly better than nitrile gloves, but they are not suitable for allergic skin and wear for a long time.

Nitrile gloves: produced by Nitrile Gloves Equipment, hard material, poor elasticity, good wear resistance, acid and alkali resistance (part of nitrile gloves cannot prevent acetone, strong alcohol), anti-static, and will not produce allergic phenomenon to the skin, suitable for allergic people and wear for a long time.

From the above differences, we are more inclined to recommend nitrile gloves to you, because our use environment requires good acid and alkali resistance. Now we have developed two nitrile gloves, whose price has started to be infinitely close to latex gloves.

Nitrile gloves price is mainly decided by the weight, at present our company has two 4.5 g and 3.5 g, 3.5 g price is already very low, our future will be further developed 2.5 grams, these need good technical strength, the differences in weight, but the quality won't have the very big difference, is the thickness of the feeling is different, for one-time use, can completely meet the use of a cycle.

Are latex gloves reusable?

Are latex gloves reusable?

Latex Gloves Equipment Exporter shares that latex gloves are made of 100% natural latex gloves with high dexterity, comfort and strength. Low pinhole rate, with excellent sealing and protection characteristics. Widely used in electronics, food, medicine and optoelectronics and other related industries.

Some things can be used twice, such as cans, plastic bags, of course, latex gloves are the same, do not see a small pair of latex gloves, its use is also very big, such as drainage, rubber band, finger cover. Here's how to make these three from discarded latex gloves.

Production method: first select the relatively clean waste milk rubber gloves, cut the end of the rubber band to retain, the rest of the flat longitudinal fold three times, cut into about 1cm wide thin strips to the finger sleeve, then cut off the middle finger, ring finger sleeve, the rest of the discard. The strips are unfolded, autoclaved with rubber bands and soaked in 75% alcohol containers for later use. The gauze equal to the length of the finger sleeve is rolled into a strip of suitable thickness and filled into the finger sleeve for autoclave sterilization.

Latex Gloves Equipment Exporter

USES:

1. Drainage strip

Subcutaneous drainage strip was placed in the operation of shoulder fracture and thyroid gland, which was simple, convenient and effective. Debridement of hand (foot) trauma was performed. Drainage strips were tied to the root of the affected finger, blocking blood supply and keeping the operative field clear. During craniotomy, tissue forceps were fixed on the sterile sheet to prevent slipping and contamination after wound electric knife wire, bipolar electric coagulation wire and suction tube with drainage strips respectively. During the endoscopic operation, the working handle became loose after repeated use of the spring, and wound the drainage strip around the spring to restore the normal elasticity of the handle.

2. Rubber band

In the operation of cryptorchidism in children, the rubber band was used to fix the yixing cold upset machine on the inner thigh without tension after pulling the testicles, which caused little tissue damage. In the anal fistula hanging line operation, the rubber band played the role of chronic cutting of fistula tissue, which was conducive to wound healing and reduced postoperative recurrence rate.

3. After nasal operation, insert the finger sleeve with gauze roll into the nasal cavity to compress the nasal bleeding and reduce the pain of patients. Rubber bands of latex gloves do not stick and are not easy to break after autoclave sterilization, which is better than rubber bands bought in the market. Clever use of discarded latex gloves, convenient materials, simple production, a wide range of USES.

The above three is the introduction by Latex Gloves Making Machine Exporter again using the method, although used latex gloves is not good, but sometimes it doesn't stick to the dirt, so still can use again, do it is simple, easy to use, reduce cost, but for the sake of your safety, again use must remember to clean and disinfect oh!

Industrial gloves daily maintenance precautions

Industrial gloves daily maintenance precautions shared by Gloves Stripping Machine Supplier.

Should be often use in our daily life of a kind of commodity, to our production and daily life has brought a lot of help, in fact, in this summer, not only we need to prevent bask in, like some of our equipment also want to prevent bask in, they are often under the sun exposure is not only on the surface will fade in greatly reducing the use of these items become old, yea, not only are we afraid of ultraviolet radiation, on these devices are also needs to prevent bask in, they normally in use and put them in a cool and local, not in the sun to the local, Using these sunscreen methods can be excellent for their maintenance, increase their life, let them to create a greater economic benefit to us.

Industrial gloves produced by Gloves Hand Moulds Base in some production workshops is also very important, not because of the summer, the climate is very hot do not wear gloves, that is not possible.

With the advancement of urbanization and the continuous progress of industrialization in the global scope, industrial gloves are in great demand for safety products in China and global shopping malls, especially for all kinds of high-quality protective gloves.

According to the different types of hazards to be protected, industrial gloves can be divided into general protection, anti-cutting, high and low temperature protection, chemical protection and other varieties. Its products are widely used in petroleum and petrochemical, general industry, fire rescue, power safety and other categories, to meet the different operation on its own safety protection products of different levels of demand, to maintain the health and safety of workers in the operating environment.

Household Gloves Production Line

Talk about the protective features of industrial gloves:

1. Industrial gloves should be carefully selected after the environmental risk factors are clear. For example, acid-resistant and alkali-resistant gloves have strong acid or alkali resistance, and low-concentration acid or alkali resistance.

2. Waterproof, acid-resistant and alkali resistant gloves by Household Gloves Equipment should be carefully checked before use to investigate whether there is damage to the appearance. The easiest way is to blow into the gloves and hold the sleeve tightly with your hands to investigate whether there is air leakage.

3. Industrial gloves should be regularly tested for their electrical insulation functions. They should not be used if they do not conform to the rules.

4. Protective gloves of rubber, plastic and other raw materials should be scoured, cleaned and dried after use. High temperature should be prevented when they are kept, and talcum powder should be sprinkled on the products to prevent adhesion.

5. Touch strong oxidation acid such as nitric acid, chromic acid, because of strong oxidation will form protective gloves brittle, discoloration, early damage, should pay attention to the investigation.

6. Latex industrial gloves are only suitable for weak, low concentration of sulfuric acid, hydrochloric acid and various salts. Do not touch strong oxidizing acid (nitric acid, etc.).