Nitrile gloves should be used with attention

Following shared by the Nitrile Gloves Production Line Exporter.

Note when wearing nitrile gloves:

1. Do not wear rings or other jewelry on your hands;

2. The fingernails should be regularly trimmed, not too long, to avoid damage to the fingertips of gloves;

3. Avoid puncture of sharp objects, such as needles and toothpicks;

4. Take off the glove is to be gradually withdrawn from the wrist, not from the local fingers;

5. Pay attention to the size when selecting, too small will form the blood circulation is not smooth, too big will simply fall off;

6. Regular inspection is required. If any damage is found, it cannot be used again.

Nitrile gloves should be stored with attention:

1. Avoid light and store in a cool, ventilated and boring place with low temperature;

2. Close packaging to avoid dust pollution and oxidation of gloves;

3. All products have a certain shelf life, so we should use the gloves as soon as they are produced to avoid quality damage.

Welcome to purchase our Nitrile Gloves Production Line!

Types of gloves and maintenance matters

Types of gloves and maintenance matters

Cast Steel Hand Moulds Base wholesaler shares that industrial gloves, protective range, in addition to the resistance to chemical plant-based, and cutting, electric insulation, waterproof, cold, heat, fire flame retardant, and other functions, the general anti acid and alkali gloves and resistance to chemical protective gloves are not equal, because many chemicals relative glove material has different penetration, so when need, should choose to have all kinds of chemical penetration of protective gloves. Protective gloves are upper limb protective equipment that protects the operator's fingers from physical, chemical and biological external factors. The hand is a vulnerable part of the body during work. High-temperature gloves are made of aluminized fabrics, leather, fiberglass and flame retardant fabrics.

Gloves are supposed to protect you. Make excuses for not wearing gloves when you do your homework. "It's in the cupboard and there's no time to get it." Wait, you're asking for it. Gloves can be worn in seconds to protect workers from all kinds of injuries. Different labor protection gloves are designed for specific hazards. Knowing the type of gloves required is an indispensable preparation before work. 

For the best protective effect of gloves, the following measures should be taken:

(1) clean and dry hands when wearing;

(2) wash the chemicals off the gloves as much as possible before removing them;

(3) store in an appropriate place;

(4) regular replacement. Although damage is sometimes not visible, constant exposure to chemicals can slowly damage the glove's performance.

(5) avoid handling different chemicals with the same pair of gloves.

Welcome to purchaseour Cast Steel Hand Moulds Base for sale!

How To Use Medical Latex Gloves Correctly？

How To Use Medical Latex Gloves Correctly

Latex Gloves Production Line Supplier would like to share the correct application of medical latex gloves.

1.1 wearing dry gloves method: dip a little talcum powder (or medical starch) into your hands first to facilitate the wearing of gloves. Hold the inside surface of the glove reflexed part with your right hand and take out a pair of dry gloves. Pull the reflexed part of the glove over the cuff without exposing the wrist; Do not touch the outside of the gloves before wearing them. Do not touch the skin after wearing the gloves. Rinse the gloves with sterile saline powder and then operate.

1.2 wet gloves with hand after disinfection, while wet gloves, from sheng basin take wet gloves in a pair of gloves, water in the gloves, left hand after swiping set, slightly lifted the left hand, let the outflow water along the wrist wear well, and then left into the reflex of outside ring wear the right hand, raised his right hand, and make the water wrist outflow (wearing gloves can also be) right side first, wear gown, gloves reflex areas on the cuff, no show wrist, conditional hospital should not be commonly use this method.

1.3 wearing double gloves wearing double gloves can reduce the risk of exposure of the wearer. If the wearing of double gloves is required for certain operations (such as chemotherapy and bone marrow puncture), loose gloves are required so that one can be put on top of the other.

                                                      

1.4 replacement gloves gloves should be replaced after touching suspected contaminated areas or objects in the same patient before touching mucous membranes. Before handling non-contaminants or handling other patients, remove gloves and wash hands immediately or with disinfectant to prevent transmission of microorganisms to other patients or objects.

1.5 time of wearing gloves the longer the time of wearing gloves, the more vulnerable the maintenance barrier is. Handling gloves in harsh conditions, or handling a variety of chemicals, may cause weariness, and gloves should be replaced as appropriate during handling. Gloves that are damaged or contaminated during surgery should be replaced immediately.

1.6 during the application of the glove, the source of infection will contaminate the outer surface of the glove. It is very important to correctly remove the glove. When removing the glove, it is not allowed to be pulled forcibly. The fault off the gloves, may lead to the transmission of pollutants outside the gloves, at this time, even good barrier function is meaningless.

Welcome to purchase our Latex Gloves Production Line.

Brief Analysis Of The Performance Difference Between Rubber And Latex

Brief analysis of the performance difference between rubber and latex

Glove Intelligent Oiling Machine supplier tells you that latex by evaporation molding molding, its own numerous pores, good air permeability and because of the appearance of the pores is smooth, so mites can not adhere to, and latex juice has a very important feature is that it sends out the smell of many mosquitoes are not close. So it's the characteristics of the latex.

1. Ultra-high elasticity

2. Orthopedic function

3. Ultra-permeability

4. Durable and not easily deformed

5. Mildew-proof and antibacterial

6. Ultra-quiet without static and radiation

     

Functions of rubber:

1. Outstanding high elasticity, performance is a high rate of elongation. It is elastic at room temperature and can produce large deformation under small external force. Rubber is a completely amorphous polymer, its glass transition temperature (T g) low, molecular weight is often very large, more than hundreds of thousands. Pure natural rubber can be stretched to the original length of 800% and constantly; For a small modulus of elasticity, the stress generated at an extension of 100% is only a few hundred newtons per square centimeter; The smaller permanent deformation is insisted after breaking, i.e. the accumulation amount that cannot be recovered after repeated stress is also very small. Rubber only through cross-linking to become a valuable high elastic data, commonly known as rubber.

2. Good wear resistance, high friction coefficient and acid and alkali corrosion resistance, some varieties such as nitrile gum, fluorine rubber also oil resistance. In addition, rubber also has electrical insulation, vibration elimination and air - tightness and other characteristics. Defects are poor thermal conductivity, heat and not easy to mechanical processing.

We are the Latex Gloves Production Line Supplier,welcome to contact us.

Describe The Process Of Latex Gloves

Latex gloves latex gloves are a type of glove that differs from regular gloves in that they are manufactured from latex. Can be used as home, industry, medical, beauty and other professional applications, is the necessary hand protective equipment. Selection of natural latex, with other precision additives processing of latex gloves, products through Disposable Gloves Production Lines to special appearance processing, wear comfortable, in industrial and agricultural production, medical, daily life are widely used.

Process The Paper

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol. After emulsifying and modulating, the sol is pumped to the tundish. The rubber solution dissolved in gasoline is fed from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. Oil and water mixture to the oil and water separator, oil and water stratification. The upper gasoline is recovered, and the lower water is sent to the cooling tower by the water pump. Distillation tower kettle latex according to its own pressure to send latex mixing cylinder mixing, mixing to centrifuge separation of raw material latex gloves, and then through color mixing, filtration after waiting for use.

The glove model supplied by Disposable Gloves Production Lines Manufacturer,was cleaned with acid and alkali and water first. The cleaned model was immersed in hot water and heated before being soaked into the coagulant and soaked in glue. After the rubber, send to the oven to dry, add fiber inner sleeve, then send hot water to the oven vulcanization, drying molding. After demolding, the gloves are inflated for inspection, shaped at low temperature, dry at medium temperature, washed, dehydrated and dried before being packaged and sent to the product warehouse.

                                           

Primary Pollutant

1) mold washing wastewater and gel containing wastewater occurred in the washing process of each production line; (2) a small amount of ammonia gas occurs in the production process; (3) dust generated in boring processes; (4) air pollutants such as SO2, NOx and particulate matter occurring during boiler operation; (5) air pollutants such as SO2, NOx and particulate matter occurred during the operation of the standby diesel generator set; (6) wastes in the production process; (7) sludge in sewage treatment station.

The Solution

The water treatment process includes physicochemical, biological touch oxidation and activated carbon adsorption. The process consists of mechanical grille, conditioning tank, air float tank, biological touch oxidation tank, sedimentation tank, sand filter and activated carbon filter, and wind machine room. Waste gas treatment process text qiu li ma stone dust collector, and then with alkali water reaction, desulfurization dust.

The Characteristics

Latex gloves are suitable for automobile and battery industries. Fiberglass profession, aircraft installation; Aerospace; Environmental cleaning and cleaning. Latex gloves have wear resistance and puncture resistance. Acid and alkali resistance, grease, fuel oil and various solvents; Has a wide range of anti - chemical function, anti - oil effect is good; Approved by FDA. Latex gloves feature common fingertip texture planning, greatly enhancing grip and effectively avoiding slipping; No palm pattern patent planning, uniform adhesive penetration, enhance the protection; Unique hand planning, cotton lining for improved comfort.

In the field of automotive supervision mechanism, the opinions pointed out that in China, where the market has great potential and the wear-resistant rubber universal wheel industry is strong, the establishment of automobile production plants and assembly plants, the establishment of local distribution network and maintenance center, drive the export resources and reserves of self-owned brands of automobiles and parts, and enhance the brand influence. We will encourage auto companies to set up auto technology and engineering research and development centers in developed countries such as Europe and the United States, and cooperate with foreign companies with strong technological strength to improve the research and development and manufacturing technology of their own brands.