Production Process Of Latex Gloves

Production Process Of Latex Gloves

Latex gloves supplied from Latex Gloves Equipment Exporter,are one kind of gloves. They are different from ordinary gloves. They are made of latex. Can be used as home, industry, medical, beauty and other industries, is the necessary hand protective equipment. Latex gloves are made of natural latex with other fine additives. The products are treated with special surface and are comfortable to wear. They are widely used in industrial and agricultural production, medical treatment and daily life.

Process the paper

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol. After emulsifying and modulating, the sol is pumped to the tundish. The gasoline-soluble rubber solution is fed from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-gas cooler. Oil and water mixture to the oil and water separator, oil and water stratification. The upper gasoline is recycled, and the lower water is sent to the cooling tower by the water pump. The latex in the distillation tower kettle is sent to the emulsion mixing tank under its own pressure to be stirred and mixed, and then to the centrifuge to separate the raw latex of gloves, and then to be used after color mixing and filtration.

The glove model ,as one part of Latex Gloves Production Line,it was cleaned with acid and alkali and then washed with water. The cleaned model was immersed in hot water and heated until it was soaked with coagulant and dried before being soaked with glue. After rubber dipping, send to oven for preliminary drying, add fiber inner cover, then send hot water to oven for vulcanization, drying and forming. After demolding, the gloves are checked for air inflation, shaped at low temperature, dried at medium temperature, washed, dehydrated and dried, and then packaged and sent to the finished product warehouse.

                      

Major Pollutant

(1) mold washing wastewater and gel containing wastewater generated from washing process of each production line; (2) a small amount of ammonia gas is produced in the production process; (3) dust generated in the drying process; (4) air pollutants such as SO2, NOx and particulate matter generated during boiler operation; (5) SO2, NOx, particulate matter and other atmospheric pollutants generated by the operation of the standby diesel engine unit; (6) wastes generated in the production process; (7) sludge generated by sewage treatment stations, etc.

Processing Method

The water treatment process adopts physicochemical, biological contact oxidation and activated carbon adsorption. The technological process consists of mechanical grille, regulating tank, air flotation tank, biological contact oxidation tank, sedimentation tank, sand filter and activated carbon filter tank, and wind machine room. Waste gas treatment technology scripture keuli hemp dust collector, and then with alkali water reaction, desulfurization dust.

Characteristics

Latex gloves from Latex Gloves Production Line Manufacturer are suitable for automobile and battery industries. FRP industry, aircraft assembly; Aerospace; Environmental cleaning and cleaning. Latex gloves have wear resistance and puncture resistance. Acid and alkali resistance, grease, fuel oil and various solvents; Has a wide range of chemical resistance, oil proof effect is good; Approved by FDA. Latex gloves feature unique fingertip texture design, greatly enhance grip, effectively prevent slipping; No palm pattern patent design, uniform adhesive penetration, enhance the protection; Unique hand design with cotton lining for added comfort.

Material

Gloves are divided into cotton yarn, plush, leather and so on. Materials and fibers used to make gloves.

Protective Measures for Allergy to Latex Gloves

Obviously, latex gloves made by Latex Gloves Making Machine allergy has become an occupational disease that medical care has to guard against.

It is still difficult to avoid latex allergy in Anglo-American hospitals. There is no strong evidence in the current study that medical staff must leave the hospital in the event of a hypersensitivity reaction. Instead, it is recommended to adjust or use the following protective measures:

(1) use powder-free, low-protein latex gloves;

(2) Immediately after removing the gloves, wash your hands with a mild hand sanitizer/soap and dry your hands completely;

(3) Before the gloves are worn, the skin of the hands is completely dry;

(4) Those who have sweaty hands can wear gloves that absorb sweat and then wear latex gloves;

(5) Minimize the time of wearing gloves each time;

(6) Avoid eating foods that cross-react with latex, such as chestnuts, kiwis, bananas, and avocados.

We are Latex Gloves Equipment Supplier. If you want to know more, welcome to contact us!

PVC Gloves Performance is Affected by PVC

PVC glove made by PVC Gloves Making Machine performance is affected by many factors, PVC materials, processing methods, storage methods, etc., PVC materials are also affected by multiple internal factors, especially its molecular weight and its distribution, which has an important impact on PVC gloves.

As the molecular weight of PVC increases, the degree of attraction or entanglement between the molecular chains increases accordingly, the glass transition temperature increases, the mechanical strength of PVC gloves increases, and the heat distortion temperature increases.

Generally, as the molecular weight or degree of polymerization of the PVC resin increases, the apparent viscosity of the melt of the PVC increases, and the fluidity deteriorates, so that the processing temperature needs to be increased accordingly, and the processing temperature is raised too high to cause degradation of the resin. The processing and product properties of PVC materials depend not only on the average molecular weight, but also on the molecular weight distribution of PVC.

Generally speaking, a PVC resin having a narrow molecular weight distribution has good molding processability, not only because the processing property and the uniformity of the product properties are maintained, but also because the abnormal structures such as double bonds are mostly concentrated in the low molecular weight fraction, and the molecular weight distribution is wide. Significantly reduce its thermal stability, heat distortion temperature, electrical insulation, mechanical strength and aging resistance; in addition, PV resin can not be easily plasticized under normal processing conditions, so that PVC gloves have serious intrinsic quality. problem. Therefore, the molecular weight and distribution of the resin should be strictly controlled in the actual production process of PVC gloves.
We are PVC Gloves Making Machine Supplier. If you have demand, welcome to conatct us.

Decrypt the Latex Finger Sleeve Production Process

Latex gloves made by Latex Gloves Making Machine are suitable for car manufacturing, battery manufacturing; FRP occupation, aircraft assembly; aerospace industry; environmental cleaning and finishing. Latex gloves have abrasion resistance, puncture resistance; acid and alkali resistance, grease, fuel oil and various solvents; have a wide range of anti-chemical functions, excellent oil-repellent effect; FDA-approved.

The latex gloves have a common fingertip texture plan, which greatly enhances the grip and effectively avoids slippage; the patent plan without palm prints, uniform penetration and enhanced protection; unique hand planning, cotton fabric, and improved comfort.

Production Process

The rubber is first sliced by a rubber mixing machine, and then sliced and sent to a sol cylinder and a gasoline mixed sol. The sol is then emulsified and conditioned to pump the latex center can. The rubber solution dissolved in gasoline is fed from the top of the distillation column, heated by steam distillation, and the light component gasoline is heated to a gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. The oil-water mixture is then separated from the oil and water, and the oil moisture layer. The upper layer of gasoline is recovered, and the lower part of the water is pumped to the cooling tower for cooling. After cooling, the gas gasoline of the distillation tower is cooled. The distillation tower is fed to the latex mixing tank according to the pressure of its own, and then prepared to separate the latex raw material latex from the centrifuge. After being toned and filtered, it is ready for use.

The glove model is first cleaned by acid and alkali, and washed with water. The washed model is first immersed in hot water and heated to the immersion coagulant and immersed for dipping. After dipping, send the oven to start drying, add fiber inner sleeve, rinse hot water and then send it to the oven for vulcanization and drying. After the mold is released from the mold, the air is inspected, the low temperature is set, the medium temperature is dry, washed, dehydrated, dried and then packaged and sent to the finished product warehouse.

We are Latex Gloves Production Line Manufacturer. If you have demand, welcome to contact us.

The Main Method of Using PVC Gloves

How to wear pvc gloves producted by PVC Glove Making Machine: Select the appropriate size of pvc gloves; check the validity period on the outer packaging of the gloves; check whether the outer packaging is tight; wash hands or surgical hands before wearing pvc gloves; open the gloves; open the pockets of one hand, another Hold the glove over the folded part (the inner surface of the glove) and remove the glove; put it on the five fingers; pick up the other bag in the same way, insert the finger of the pvc glove into the inside of the cuff of the other glove, and wear the glove. Then, put the glove on the flip, put your hands together, and adjust the position of the gloves.

How to remove the pvc gloves: Use the gloved hand to pinch the edge of the other contaminated surface of the glove to take off the glove, hold the removed glove with the gloved hand, and pinch the other with the gloved hand Only the edge of the glove cleaning surface (inside), take off the glove, pinch the inside of the glove into the medical waste container, and wash your hands after removing the pvc gloves.

Precautions:

1. The use of gloves is not a substitute for hand hygiene.

2. Hand hygiene should be carried out before wearing pvc gloves and after taking off gloves.

3. When the gloves are damaged, hand hygiene should be performed before replacing the new gloves.

4. Do not wear the same pair of gloves when handling more than one patient.

5. When wearing gloves or medical treatment, the gloves should be replaced when moving from the contaminated parts of the same patient (including incomplete skin, mucous membranes or implanted medical equipment) to the cleaning area.

Common mistakes:

1. Touch the glove cleaning surface (inside) when wearing pvc gloves.

2. Wear gloves to answer calls, write, type, etc.

3. Diagnosis and treatment The gloves were not replaced between different patients.

4. Do not wash your hands before wearing gloves and after removing gloves.

We are PVC Glove Making Machine Supplier. If you have demand, welcome to contact us!

Nitrile Gloves Product Features

Nitrile gloves made by Nitrile Glove Making Machine features:

1. Excellent chemical resistance, certain ph resistance, and good chemical protection against solvents, petroleum and other corrosive substances.

2. Good physical properties, good tear resistance, puncture resistance and friction resistance.

3. The style is comfortable. The glove and palm machine designed according to man-machine engineering can make the wearer comfortable by bending the fingers, which is conducive to blood circulation.

4. Free from protein, amino compounds and other harmful substances, rarely allergic.

5. Short degradation time, easy to handle and favorable to environmental protection.

6. Silicon free, with certain antistatic performance, suitable for the production needs of the electronic industry.

7. Low chemical residue on the surface, low ion content, small particle content, suitable for strict dust-free room environment.

We are Nitrile Glove Making Machine Supplier. If you have demand, welcome to contact us!