What are the gloves mold in Latex Gloves making machine in China?

The glove mold is a kind of mold used by the latex gloves making machine in china to make glove latex. The glove mold is divided into a ceramic glove mold and an aluminum alloy glove mold. Ceramic glove molds are mainly used in the field of liner-free household latex gloves, while aluminum alloy gloves molds are applicable to various PU, PVC, nitrile, latex, film and other glove processing fields. Aluminium alloy glove mould is imported from China and South Korea into the latex gloves production line manufacturer. It has strong rigidity and good heat dissipation performance, which gradually replaced the ceramic glove mold in most latex fields.

PVC Production Line features

1. PVC Production Line is fully automated based on the chemical properties of raw materials and the process requirements for glove forming, and the equipment flow is compact.

2. The drying box adopts the tunnel-type drying method, the principle of hot air rising, recycling hot air circulating stirring, so that the machine can get the minimum power.

3, the use of effective heating space hot air circulation principle to reduce the cost; multi-stage PID temperature intelligent control system, the temperature error does not exceed ±5°C, uniform heat gloss.

4, PVC Gloves Equipment production, unique joint design, replacement of the mold is simple and speed up the cycle;

5, automatic vibration glue, even glue system makes the finished gloves better and neat, uniform thickness.

New trends in the development of packaging machinery

The domestic packing industry has developed at a low level, and some high-concentration packing equipment still relies on foreign imports to meet domestic demand. Although the domesticpacking machinery market has broad prospects, problems such as stand-alone automation, poor stability and reliability, unsightly appearance, and short life time have also caused domesticpacking machine suppliers products to suffer criticism.

1, security testing technology

2, motion control technology

3, flexible production

4, manufacturing execution system

Nitrile Gloves precautions

Please note when storing

1. Protect from light and store it in cool, ventilated and dry place;

2. Close the package in the gloves packging machine to avoid dust pollution and prevent oxidation of the gloves.

3. Any product has a certain shelf life. Once nitrile gloves are produced in the nitrile gloves equipment, they should be used as soon as possible to avoid quality damage.

Wear caution

1. Do not wear rings or other jewelry on your hands;

2. Hand nails should be trimmed regularly, not too long, so as not to cause damage to the glove fingertips;

3. To prevent the piercing of sharp objects, such as needles, toothpicks, etc.;

4. Take off the gloves to slowly withdraw from the wrist, can not pull from the fingertips;

5. Pay attention to the size when choosing. Too small will cause the blood to flow smoothly. If it is too large, it will easily fall off.

6. Need to do regular inspections, if you find damage can not be used.

PVC gloves production line equipment process

Impregnation: The hand mould is immersed in the stock solution in the PVC gloves equipment orderly.

Roller lip: Use a moderate and subtle angle to make curls on the cuff of the glove.

Release: The worker quickly and orderly removes the finished glove from the hand mold in the PVC gloves production line.

Packing: After the physical property inspection and appearance inspection, carry out various packaging.

How maintain the household gloves machine?

1, refueling and cleaning. If the household gloves machine is not refueled in a timely manner, it will increase the rate of defective products and reduce the efficiency of the machine.

2, cutting knife. The upper cutter and the lower cutter must not be too close to each other, otherwise it will affect the use of the household gloves making machine. At the same time, it must be ensured that the needle plate and the lower blade do not work loose and cannot be loosened.

3, noise. Once abnormal noise is found on the machine, it should be cut off immediately, stop using it, and prevent damage to the machine.

4, injection. Every day, it should be checked whether the fuel injection inside the oil hood is normal. At the same time, attention should be paid to the daily cleaning of flying sand and dust.

5, check.

Which are kind of medical gloves?(二)

Check gloves

1. Powder sterilization inspection gloves

2. Powder-free sterilization inspection gloves

3. Powder non-sterile inspection gloves

4. Non-powder non-sterile inspection gloves

All for regular medical use

There are also some special-purpose high-end gloves, but also belong to surgical gloves, but due to high prices, domestic hospitals are not often used, such as gynecological gloves, orthopedic gloves, dental gloves, micro gloves, color gloves, etc.

Our company are medical making machine suppliers, we can supply high quality medical making machine.

Which are kind of medical gloves?(一)

According to the use of the environment can be divided into surgical gloves and inspection gloves 2 categories

According to the raw materials, they can be divided into two categories:natural latex gloves and nitrile rubber gloves. In the case of domestic non-explanatory materials, they refer to natural latex gloves. Nitrile rubber gloves are only used in foreign countries.

Surgical gloves:

1. Powdered surgical gloves

2. Powder-free sterilized surgical gloves

3. Have non-sterile surgical gloves

4. Non-powder non-sterile surgical gloves

Less practical use of the latter two types

Our company are nitrile gloves equipment suppliers,we have nitrile gloves equipment.

PVC Gloves Equipment features(二)

4, mold positioning technology, you can solve the machine Coding.

5, glove curl roller set below the mold rotation speed set above, the use of polyurethane roller curling technology. Even if the glove curling smooth, strong, but also solved the PVC Gloves Production Line at the same time multi-standard production problems.

6,PVC Gloves Machine the whole appearance of the design smooth, beautiful. Trunking, water pipes, steam pipe layout hidden.

PVC Gloves Equipment features(一)

1, the core components of the production line PVC Gloves Equipment chain structure. Chain running resistance is small, very smooth operation, is to solve the key chain jitter operation.

2, Drying oven with vertical hot air circulation, full thermal cycle in the oven, uniform temperature distribution to save energy. Film dry symmetry, to ensure the physical properties of plastic film.

3, continuous production of PVC Production Line, mold cleaning is critical, especially the Ministry of the Ministry of cleaning, cleaning is not ideal direct impact on product quality.

Latex gloves production line raw material steps(二)

3. Preparation of Latex Gloves Equipment formula with special emphasis on the preparation of rubber, requiring the simultaneous use of two different characteristics of nitrile rubber latex mixed use, and the two latex acrylonitrile content difference of 3% ~ 10 %, Under these conditions, two kinds of latexes can be mixed and used in the ratio of 30-70: 70-30, the specific ratio depends on the difference of acrylonitrile content.

4. Latex pre-vulcanized latex pre-curing materials used depending on the latex origin and climate change accordingly

5 coagulant preparation of Latex gloves production line as long as calcium nitrate aqueous solution as a coagulant, if necessary, add a certain amount of humectants (such as Kao) and release agents (such as calcium carbonate, etc.)

Latex gloves production line raw material steps (一)

Latex glove production line manufacturers talk about medical gloves production line raw material steps

1. Preparation of dispersant and related reagents Preparation of protective agent casein, diffusion agent NNO, stabilizer potassium hydroxide, surfactant and emulsifier solution preparation according to conventional methods of preparation of natural latex gloves,

2. Preparation of dispersions Fufan medical gloves used in the production line of the main dispersion are: sulfur (S), zinc oxide (ZnO), ZDC accelerator, accelerator BZ, Brightener TiO2.