Principle and characteristics of latex gloves production line

Latex gloves production line can be humanized designed according to the natural rubber curing molding process. The process is reasonable, the product is stable, the coating thickness, length and length, no drop point, uniform temperature, high yield, simple release and so on.

The latex gloves production line has a compact equipment and a more rational mechanical structure, including gloves stripping machine and counting machine, which can increase production efficiency.

Latex gloves production line adopts chain wheel for main shaft, coextrusion one-step method, to speed up production and increase production.

If you need the gloves production line, welcome to contact us to know more.

Common problems in nitrile glove production

Nitrile gloves production line adopts the most advanced gloves production technology, layout and production process, the product has a high pass rate. We often encounter some problems in production. Let's discuss it together.

1, pinhole

Reason: the foam material has latent bubbles and the condition of breaking is not proper. The condition of coagulation is not proper and the dispersing liquid is not in good condition.

Methods: the adhesive parking time exceeds 16h, Shoumo temperature is not too high, mix temperature to 24 DEG C, Shoumo to clean, to ensure the coagulant filtration, dispersion of grinding time enough.

2, flow marks and marks

Reason: discontinuous entry and exit of rubber or small jitter during the stain prevention process, improper gelling speed control, and improper temperature control.

Measures: reduce the jitter, control the amount of stabilizer, and control the temperature of the dip.

Hope this helps. We can also supply the cast steel hand moulds base, unpowered beading machine etc. If you need, welcome to contact us.

Characteristics of latex gloves production line

Jun. 20, 2017 | 15:52:54

Latex gloves production line adopts continuous production method, with uniform film and bright colors, and various models and specifications can be produced online at the same time.

1, the production line can be humanized designed according to the curing process of various materials, and the process is reasonable and automatic.

2, Gloves stripping machine work efficiency is high, it is easier to release work.

3, the accuracy of temperature control is high, so as to improve the qualified rate of products.

We can also supply Nitrile gloves production making machine, counting machine etc. If you need, welcome to contact us.

Gloves stripping machine to meet production needs

Gloves stripping machine is widely used in various gloves production lines to provide production efficiency and product quality. Applied to household gloves production line, PVC gloves production line, etc. It can meet the needs of various gloves production.

Gloves stripping machine can operate synchronously with the production line. The operation is smooth and the noise is low. It has the advantages of quick demoulding speed, low operator, low production cost, good product quality and high yield, and can completely replace manual operation.

We can also supply the high quality unpowered beading machine, chain wheel for main shaft etc. If you need, welcome to contact us.

Specification for the use of nitrile gloves

As a manufacturer of nitrile gloves production line, we not only provide advanced production equipment, but also share some specifications for the nitrile gloves.

Nitrile gloves need attention when they are dressed:

1, you can't wear rings or other jewelry on your hands.

2, fingernails should be regularly trimmed, not too long, so as not to damage the fingertips of gloves.

3, remove gloves from the wrist down slowly, can not pull from the fingers of the place.

4, the choice should pay attention to size, too small will cause the blood flowing smoothly, too large, easy to fall off.

5, regular inspection is required. If damaged is found, it cannot be used again.

We can supply the high quality gloves production line, such as household gloves production line, punching hand moulds base etc. Welcome to contact us to know more.

Introduction of process for PVC gloves production line

PVC gloves production line has a high degree of automation, large output, stripping machine can be configured, you can also design and install the length of the production line according to the customer's production site.

PVC gloves production line equipment is through the impregnation technology to produce PVC as raw material synthetic rubber gloves, generally has the following parts:

Impregnation: the mold orderly immersed in solution.

Roll lip: use a moderate and delicate angle to make a roll lip in the cuffs of the glove.

Release: the stripping machine, rapid and orderly completion of the production will be removed from the fingerprint on the gloves.

Count the quantity: count the number by using the gloves counting machine.

Packing: after physical examination and visual inspection, all kinds of packing are carried out.

If you have interest in our gloves production line etc. Welcome to contact us.